Voron 2.4 Full Printer Kit (Preorder)
Voron 2.4 Full Printer Kit (Preorder)
Orders will ship in about 1-2 weeks. Subject to change slightly due to supply constraints.
Shipping charges and customs/import taxes are not included.
The Voron 2.4 Full Printer Kit is composed of high quality parts that are sourced from reputable sources so that you don't waste time or money upgrading stuff down the line.
Kit highlights:
- LDO frame kit (Available in various colors depending on the size)
- Default frame color is black but let us know if you have any other preferences and we will make our best effort to get you the requested color (no promises)
- Stainless steel fastener bundle. Extras are included for all fasteners!
- POWGE motion parts kit
- LDO linear rails *optional upgrade
- LDO motor kit (NOTE: Extruder motor is currently only compatible with Clockwork 1)
- BOM specified electronics from reputable US sources
- Fysetc Spider V2.2/BTT Octopus V1.1/ BTT Octopus Pro V1.0
- DIY wiring kit
- Stealthburner RGBW LED Harness
- Clear Acrylic Panels (From Mandala Rose Works)
- Black ABS Panels (From Mandala Rose Works)
- Cast Aluminum Build Plate
- ADXL345 (for Klipper Input Shaper) *while supplies last
- Spring steel flex plate with magnet
Items NOT included in this kit:
- Raspberry Pi
Full Default BOM:
*Some items and/or quantities may be different depending on your selections above.
Fastener | Qty | Notes |
Option 1: 3DMP Black Stainless Steel Hardware Kit Option 2: LDO Hardware Kit |
1 |
|
Motion | Qty | Notes |
GT2 20T Pulley (5mm ID 6mm W) | 3 | POWGE motion kit |
GT2 20T Toothed Idler (5mm ID 6mm W) | 2 | POWGE motion kit |
GT2 20T Toothed Idler (5mm ID 9mm W) | 4 | POWGE motion kit |
625 Rain & Dew Bearing | 12 | POWGE motion kit |
F695 Rain & Dew Bearing | 20 | POWGE motion kit |
GT2 16T Pulley (5mm ID 6mm W) | 4 | POWGE motion kit |
GT2 80T Pulley (5mm ID 6mm W) | 4 | POWGE motion kit |
GT2 20T Pulley (5mm ID 9mm W) | 4 | POWGE motion kit |
5x60mm Shaft - Grind Flat | 4 | POWGE motion kit |
5x30mm Shaft | 1 | POWGE motion kit |
GT2 Belt Loop (6mm W) - 188mm | 4 | POWGE motion kit |
Gates GT2 LL-2GT-9 RF Open Belt (9mm wide) - 5m | 1 | POWGE motion kit |
Gates GT2 LL-2GT-6 RF Open Belt (6mm wide) - 5m | 1 | POWGE motion kit |
MGN9H Linear Rails | 6 | |
MGN12H Linear Rails | 1 | |
Electronics | Qty | Notes |
Omron D2F-5L Micro Switch | 3 | |
Omron TL-Q5MC2 Inductive Probe | 1 | |
GDSTIME 40x40x10 Axial Fan (24V) | 1 | |
GDSTIME 50x50x15 Centrifugal Blower Fan (24V) |
1 | |
GDSTIME 60x60x20 Fan (24V) | 3 | |
Control Board Option 1: Fysetc Spider V2.2 Option 2: BTT Octopus V1.1 Option 3: BTT Octopus Pro V1.0 |
1 | |
TMC2209 Stepper Motor Drivers | 7 | |
Fysetc Mini 12864 Display | 1 | |
MicroSD Card 8GB | 2 | |
Mean Well LRS-200-24 PSU | 1 | |
Power Inlet Option 1: Adam Tech IEC-GS-1-100 Unfiltered AC Power Inlet / Glass Fuse 8A 250V 5 X 20mm (Qty: 1) Option 2: TycoElectronics 10EGG1-2 Filtered Power Inlet (Qty: 1) / ZF Rocker Switch DPST 16A (Qty: 1) / Glass Fuse 8A 250V 5 X 20mm (Qty: 2) |
1 | |
Omron G3A-210B-DC5 SSR | 1 | |
DIN Rail Mount Bracket for G3A SSR | 1 | |
BAT85 Diode | 1 | |
LDO Voron 2.4 Motor Kit | 1 | NOTE: The included extruder motor is currently only compatible with Clockwork 1. |
C13 Power Cord | 1 | |
Thermal Fuse (125°C) | 2 | |
XY Endstop PCB with right angle JST-XH connector | 1 | stl for this can be found here |
Z Endstop PCB with right angle JST-XH connector | 1 | stl for this can be found here |
ADXL345 Accelerometer | 1 | For Klipper Input Shaper (while supplies last) |
Frame | Qty | Notes |
Rubber Foot | 4 | |
DIN 3 Rails (35mm W) | 2 | |
LDO Frame Kit w/ Angle Corner Connectors | 1 | |
Extruder & Hotend | Qty | Notes |
BMG Extruder Kit | 1 | |
24V 50W Heater Cartridge | 1 | |
HT-NTC100K Thermistor Cartridge | 1 | |
Cables | Qty | Notes |
Nylon Cable Ties 1.7x70mm | 50 |
DIY wiring kit |
20AWG Linneoflon (meters) | 8 | DIY wiring kit |
24AWG Linneoflon (meters) | 65 | DIY wiring kit |
18AWG Helukabel PVC wire for mains 5x1.20 meters | 1 | DIY wiring kit |
Spade Crimp Terminal 4.8mm Female | 25 | DIY wiring kit |
Insulated Crimp Receptacle | 10 | DIY wiring kit |
JST-XH Connector Plug 4 Position | 10 | DIY wiring kit |
JST-XH Connector Plug 3 Position | 10 | DIY wiring kit |
JST-XH Connector Plug 2 Position | 15 | DIY wiring kit |
MicroFit3 Connector Plug 14 Position | 1 | DIY wiring kit |
MicroFit3 Connector Plug 4 Position | 4 | DIY wiring kit |
MicroFit3 Connector Plug 3 Position | 2 | DIY wiring kit |
MicroFit3 Connector Plug 2 Position | 6 | DIY wiring kit |
MicroFit3 Connector Receptacle 4 Position | 4 | DIY wiring kit |
MicroFit3 Connector Receptacle 3 Position | 2 | DIY wiring kit |
MicroFit3 Connector Receptacle 2 Position | 6 | DIY wiring kit |
JST XH Female Pin | 70 | DIY wiring kit |
MicroFit3 Female Pin | 40 | DIY wiring kit |
MicroFit3 Male Pin | 40 | DIY wiring kit |
MLX Power Receptacle 3 Position | 1 | DIY wiring kit |
MLX Power Plug 3 Position | 1 | DIY wiring kit |
MLX Male Pin | 3 | DIY wiring kit |
MLX Female Pin | 3 | DIY wiring kit |
0.75 Ferrules | 10 | DIY wiring kit |
Standard Cable Chain Kit | 1 | Includes all 3 cable chains |
Stealthburner RGBW LED Harness | 1 | |
Misc | Qty | Notes |
Bowden Tube (4mm OD, 3mm ID) - 1500mm | 1 | |
Bowden Tube (4mm OD, 2mm ID) - 500mm | 1 | |
Bowden Coupler | 1 | |
6mm x 3mm Round Neodymium Magnets | 10 | |
3M VHB Tape (2" x 4" Sheet) | 1 | |
Single Sided Foam Panel Tape (5mm width/3mm thickness/5m length) | 1 | |
Single Sided Foam Panel Tape (5mm width/1mm thickness/10m length) | 1 | |
Fume Extractor Carbon Filter Element | 1 | |
Panels | Qty | Notes |
Mandala Rose Works Black ABS Panels | 1 | |
Mandala Rose Works Clear Acrylic Panels | 1 | |
Buildplate | Qty | Notes |
Standard MIC-6/ATP-5 Cast Aluminum Build Plate | 1 | |
Silicone AC Heater w/ thermistor | 1 | |
Spring Steel Flex Plate w/ magnet |
1 | PEI is preapplied |