This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker
Feed your Printer the Filament of the Gods.
Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.
Feed your Printer the Filament of the Gods.
PPS-CF (Polyphenylene Sulfide - Carbon Fiber) filament offers superior industrial performance over standard materials like ABS, featuring extremely high heat resistance, exceptional chemical resistance, high stiffness, and low moisture absorption. It is a high-performance material ideal for harsh environments, providing superior dimensional stability, reduced warping, and greater strength, making it suitable for automotive and aerospace applications..
- Arrives to you in a cardboard box, with filament wound in a polycarbonate spool, vacuum sealed with a desiccant bag.
- Diameter: 1.75mm (+/-0.03mm)
- Filament Net Weight: 1KG
Check out our other lines of Ambrosia Filament!
Ambrosia Filament's Recommended Print Settings for our ASA filament:
| Attribute |
Accepted Value(s) [Our Recommended Value] |
| Extruder Temperature |
300-350 Degrees Celsius [340]
|
| Heated Bed |
90-110 Degrees Celsius [100] |
| Build Surface |
PEI, Buildtak, or similar surface [Textured PEI] |
| Cooling Fan |
0-40% range varies by cooling capabilities |
| Environmental Temperatures |
40-120C [70C] |
| Soluble Support Materials |
|
Technical Specifications for our ASA Filament:
| Physical Properties
|
Test Methodology |
Values |
| Density |
ISO1183 |
1.3-1.31 g/cm^3 |
| Melt Flow Rate (250C/2.16KG) |
ISO 1133 |
3-6 g/10min |
| Mechanical Properties |
Test Methodology |
Values |
| Tensile Strength |
ISO 527 |
100-110 Mpa |
| Elongation at break |
ISO 527 |
1-3% |
| Flexural Modulus |
ISO 527 |
5500-6000 Mpa |
| Flexural Strength |
ISO 178 |
170-180 Mpa |
| Impact Strength |
ISO 180 |
25-30 KJ/m^2 |
| Thermal Dynamic Properties |
Test Methodology |
Values |
| HDT@ 0.455 MPa(66 psi) |
ISO 75 |
245C |
Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.
Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.
